في الوقت الحاضر ، يتنوع مصنعو قوالب كبس الأقراص من حيث الحجم والسعة ، كما تختلف جودة المنتج. بالإضافة إلى ذلك ، هناك ما يقرب من 20 إلى 30 نوعًا من القوالب والمواصفات والنماذج ، وما يصل إلى 40 إلى 50 نوعًا من أشكال الألواح ، والتي تسبب بعض الصعوبات في اختيار القوالب لشركات الأدوية.

We at RICH PACKING believe that three factors determine the quality of rotary tablet press molds: size, material and heat treatment. In tablet production enterprises, tablet presses and dies are equipment that directly compress granules into tablets. As the main consumables in the tablet pressing process, the mold is used in a large amount. During tablet compression, since the die is mainly subjected to axial alternating loads, it is generally subjected to an axial force of about 50-100KN, which will cause a great loss to the die. The correct and reasonable use method can ensure the quality of the tablet and the service life of the mold, thereby reducing the production cost.

The following points should be paid attention to when using the tablet press mold:
⑴The tableting workshop should be equipped with a die room, and a special person is responsible for the inspection, inspection, maintenance, storage and distribution of the die.
⑵Before and after use, check the surface roughness of the mold to see if there are curling, missing corners, bursts and wear; one side of the lettering die should be bright to prevent unclear writing on the film and pressing, and lamination during pressing, etc. .